Survey Equiptment Supplier Malaysia | Pentax Malaysia, Topcon Malaysia, CHC Malaysia, Nikon Malaysia, GNSS, GPS System, GNSS Sensor, Total Station, Electronic Theodolite, Laser Instrument, Reflector, Auto Level, Digital Level

Before using the LN-100, it is necessary to perform the user registration to activate the TSshield.

Automatic Self-levelling

After the Power is turned ON, the instrument automatically starts leveling itself, With internal precise tilt sensor and motorized mechanism.
Conventional way for leveling the instrument with foot screws were totally eliminated.

Choose set up method

For setting up instrument at any given point, 4 methods are supported, in order to flexibly adapt to different situations of known point availability at the construction site. This will help easy orientation of the instrument.

• Resection (Instrument at any givenpoint and measure 2 known points)
• Instrument at any given point and measure 2 points (coordinate origin and a point on one of coordinate axis)
• Instrument at a known point and measure a back sight point (known point)
• Instrument at the coordinate origin and measure a point on one of coordinate axis.

Android Terminal as Controller

Android terminal can be used as a controller of the instrument and measurement.
The exclusive control software, “TopLayout” is a free software. Transferring design or measured coordinate data can be done directly with PC or through e-mail or cloud server using on the Android terminal.
With this communication functions, field and office are connected effectively.

Wide Working Coverage

The measurement can be preformed in 200m diameter area centered by the instrument and within +/-10m elevation difference between the instrument and prism.
This eliminates unnecessary change of instrument location, therefore, improve efficiency of entire measuring or layout work.

Guide Light — Brig to recognize

The Guide Light guides operator to instantly recognize the line between the instrument and the selected stake out point, with clearly visible Green and Red lights.

High speed position update

Prism position on the terminal display is updated 20 times/second, which enables very smooth trace of prism movement, without feeling delay, and therefore, locating prism precisely to the stake out point.

Both hands can be used

Holding the terminal on the arm holder, both hands become usable which greatly improves speed and efficiency of works to drive in stakes or nails.

Special algorithm

Actual layout work flow were carefully examined and an exclusive algorithm was employed to most suit to actual work flow through putting stakes/nails to measure and record stake/nail positions.
After once the prism is laid down to the ground and plumbed again after putting the stake, the instrument will immediately and automatically re-lock the prism. Therefore, the operator does not need to care instrument status nor control the instrument to search and lock the prism and can concentrate to put the stake and measure its position.
The works necessary o be done at the stake out point can be very efficiently accomplished.